Instructions

Intesis
®
Modbus RTU – Fujitsu User Manual r1.3 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
5 / 21
1 Presentation
The INMBSFGL001I000 interfaces allow a complete and natural integration
of Fujitsu air conditioners into Modbus RTU (EIA-485) networks.
Reduced dimensions. 93 x 53 x 58 mm
3.7” x 2.1” x 2.3”
Quick and easy installation.
Mountable on DIN rail, wall, or even inside the indoor unit of AC.
• External power not required.
• Direct connection to Modbus RTU (EIA-485) networks. Up to 63 INMBSFGL001I000 devices can be connected
in the same network.
INMBSFGL001I000 is a Modbus slave device.
• Direct connection to the AC indoor unit.
• Configuration from both on-board DIP-switches and Modbus RTU.
• Total Control and Supervision.
• Real states of the AC unit's internal variables.
• Allows simultaneous use of the AC’s remote controls and Modbus RTU.
* Up to 63 Intesis devices can be installed in the same Modbus RTU bus. However, depending on the configured speed, the installation of Modbus Repeaters may
be required
• SCADA
• PLC
• DDC
• BMS
• HMI
• Controller
• etc
Up to 63 AC
indoor units*
Modbus RTU
EIA-485 network
Modbus RTU
Master
device
INMBSFGL001I000
INMBSFGL001I000
INMBSFGL001I000