Data Sheet

© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
1 / 2
INMBSKNX***0000
KNX to Modbus Slave gateway
Order Codes:
INMBSKNX1000000 (100 points)
INMBSKNX2500000 (250 points)
INMBSKNX6000000 (600 points)
INMBSKNX1K20000 (1200 points)
INMBSKNX3K00000 (3000 points)
The Intesis INMBSKNX***0000 Gateway has been specially designed
to work as a translator between a KNX installation and Modbus TCP
and/or Modbus RTU based control and monitoring systems.
Intesis acts as any other KNX device in a KNX system, allowing both
Modbus TCP and Modbus RTU client/master devices to read and write
on all configured KNX communication objects.
Modbus RTU masters are connected to the serial port of the gateway,
while Modbus TCP devices are connected to the Ethernet port. On the
KNX side, the gateway simulates a KNX device and acts as if it was
another device in the KNX system.
Configuration project is done through Intesis MAPS.
• Handles conversion between Modbus (RTU & TCP) and KNX TP-1
• Manages Modbus TCP and Modbus RTU simultaneously
• Connects with up to 5 simultaneous Modbus TCP clients to KNX
(processing up to 3000 Modbus registers)
• Configuration through IP or USB (Console) port
• Datalogging though external USB port
• Plastic housing that mounts on 35-mm DIN-rail
• Front cover LED indicators to provide easy to check
communication status on both the Ethernet and serial ports
• Includes Intesis MAPS with automatic updates for both Intesis
MAPS and Gateway’s firmware
HOW IT WORKS
FEATURES