Data Sheet

© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
2 / 2
Modbus
KNX
RTU
TCP
Connection
EIA485 (3 wire isolated)
EIA232 (DB9 connector)
10BASE-T
100BASE-TX
KNX TP-1
Date rate
2.4, 4.8, 9.6, 19.2, 38.4,
57.6, 115.2kbps
10 Mbps
100 Mbps
9.6 kbps
Data Types
&
Functions
supported
1-Read Digital Outputs
2-Read Digital Inputs
3-Read Holding Registers
4-Read Analog Registers
5-Write Single Digital Output
6-Write Single Analog Register
15-Write Multiple Digital Output
16-Write Multiple Holding Registers
DPT 1.X / DPT 5.X
DPT 6.x / DPT 7.x
DPT 8.x / DPT 9.X
DPT 12.x / DPT 13.x
DPT 14.x / DPT 20.x
Enclosure
Plastic, type PC (UL 94 V-0)
Net dimensions (dxwxh): 90x88x56 mm
Recommended space for installation (dxwxh): 130x100x100mm
Color: Light Grey. RAL 7035
Battery
Size: Coin 20mm x 3.2mm
Capacity: 3V / 225mAh
Type: Manganese Dioxide Lithium
Mounting
Wall.
DIN rail EN60715 TH35.
Console
Port
Mini Type-B USB 2.0 compliant
1500VDC isolation
Terminal Wiring
(for power supply and
low-voltage signals)
Per terminal: solid wires or stranded wires (twisted or with
ferrule)
1 core: 0.5mm
2
… 2.5mm
2
2 cores: 0.5mm
2
… 1.5mm
2
3 cores: not permitted
If cables are more than 3.05 meters long, Class 2 cable is required.
USB port
Type-A USB 2.0 compliant
Only for USB flash storage device
(USB pen drive)
Power consumption limited to 150mA
(HDD connection not allowed)
Power
1 x Plug-in screw terminal block (3 poles)
9 to 36VDC +/-10%, Max.: 140mA.
24VAC +/-10% 50-60Hz, Max.: 127mA
Recommended: 24VDC
Push Button
Button A: Check the user manual
Button B: Check the user manual
Operation
Temperature
0°C to +60°C
Ethernet
1 x Ethernet 10/100 Mbps RJ45
2 x Ethernet LED: port link and activity
Operational
Humidity
5 to 95%, no condensation
Port A
1 x KNX TP-1 Plug-in screw terminal block orange (2 poles)
2500VDC isolation from other ports
KNX power consumption: 5mA
Voltage rating: 29VDC
1 x Plug-in screw terminal block green (2 poles)
Reserved for future use
Protection
IP20 (IEC60529)
LED
Indicators
10 x Onboard LED indicators
2 x Run (Power)/Error
2 x Ethernet Link/Speed
2 x Port A TX/RX
2 x Port B TX/RX
1 x Button A indicator
1 x Button B indicator
Switch A
(SWA)
1 x DIP-Switch for PORT A configuration:
Reserved for future use
PORT B
1 x Serial EIA232 (SUB-D9 male connector)
Pinout from a DTE device
1500VDC isolation from other ports
(except PORT B: EIA485)
1 x Serial EIA485 Plug-in screw terminal block (3 poles)
A, B, SGND (Reference ground or shield)
1500VDC isolation from other ports
(except PORT B: EIA232)
Switch B
(SWB)
1 x DIP-Switch for serial EIA485 configuration:
Position 1:
ON: 120 Ω termination active
Off: 120 Ω termination inactive
Position 2-3:
ON: Polarization active
Off: Polarization inactive
CONNECTIONS
ELECTRICAL & MECHANICAL FEATURES
Power Supply
KNX
Ethernet
Modbus TCP
USB
storage
Modbus RTU
EIA485
Console
Port
Modbus RTU
EIA232
PROTOCOLS
KNX is the world´s only open Standard for the
control in both commercial and residential
buildings. This standard is based upon more
than 20 years of experience in the market,
amongst others with predecessor systems to
KNX: EIB, EHS and BatiBUS. Bus devices can
either be sensors or actuators needed for the
control of building management equipment such
as: lighting, blinds/shutters, security systems,
energy management, heating, ventilation and
air-conditioning systems, signaling and
monitoring systems, interfaces to service and
building control systems, remote control,
metering, audio/video control, white goods, etc.
For further information visit www.knx.org
Modbus Protocol is a de facto standard, truly
open and the most widely used network protocol
in the industrial manufacturing environment.
Modbus is used in multiple applications to
monitor and program devices; to communicate
between intelligent devices and sensors and
instruments; to monitor field devices using PCs
and HMIs.
But Modbus is not only an industrial protocol.
Building, infrastructure, transportation and
energy applications also make use of its
benefits.
For further information visit
http://www.modbus.org
COMMUNICATION
100 mm
(h)
100 mm (w)
130 mm
(d)