Instructions

Intesis
®
INMBSMIT001I000
User’s Manual r2.4 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
13 / 19
3.3 DIP-switch Configuration Interface
All the configuration values on INMBSMIT001I000 can be written and read from Modbus
interface. Otherwise, some of them can also be setup from its on-board DIP-switch interface.
The device has DIP-switches SW1, SW3 and SW4 on the following locations:
The following tables apply to the interface´s configuration through DIP-switches:
SW1 – AC indoor unit’s features: fan speed & vanes
SW1-P1..4
Description
Unidad interior de A.A. con 4 vel. De ventilación y AUTO (Valor por defecto)
AC indoor Unit has 4 fan speeds and AUTO (Default value)
Unidad interior de A.A. con 4 vel. De ventilación
AC indoor Unit has 4 fan speeds
Unidad interior de A.A. con 3 vel. De ventilación y AUTO (Valor por defecto)
AC indoor Unit has 3 fan speeds and AUTO (Default value)
Unidad interior de A.A. con 3 vel. De ventilación
AC indoor Unit has 3 fan speeds
Not defined
Unidad Interior de A.A. con 2 vel. De ventilación
AC Indoor Unit has 2 fan speeds
Not defined
Not defined
AC Indoor Unit has 3 or 4 fan speeds, with or without fan-auto (Default value).
AC Indoor Unit has 2 fan speeds, without fan-auto
SW3
SW4
K1
FIXING
CABLE
EIA485
A B
AC Unit
SW1
SW1
SW4
ON
1 2 3 4
ON
SW3
1 2 3 4
1 2 3 4 5 6 7 8
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON