Instructions

Intesis
TM
INMBSPAN001I100
User’s Manual r1.2 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
15 / 22
4.3 DIP-switch Configuration Interface
All the configuration values on INMBSPAN001I100 can be written and read from Modbus
interface. Otherwise, some of them can also be setup from its on-board DIP-switch interface.
The device has DIP-switches SW1, SW3 and SW4 on the following locations:
The following tables apply to the interface´s configuration through DIP-switches:
SW1 – AC indoor unit’s configuration
SW1-P1..4
Description
AC unit does not have FAN mode (Panasonic AC unit does not have FAN mode available).
AC unit has FAN mode (Default mode) (Panasonic AC unit has FAN mode available).
AC unit does not have horizontal vanes.
AC unit has horizontal vanes (Default value).
Keep the switch into this position (Default value).
Do not turn the switch into this position (not applicable).
Keep the switch into this position (Default value).
Do not turn the switch into this position (not applicable).
SW3
SW4
K1
FIXING
CABLE
EIA485
A B
AC Unit
SW1
SW1
SW4
ON SAB
1 2 3 4
SW3
1 2 3 4
1 2 3 4 5 6 7 8
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB