Instructions

Intesis

Modbus TCP – Modbus RTU User Manual r1.2 eng

This information is subject to change without notice

URL https://www.intesis.com

9 / 17

3 Set-up process and troubleshooting

Pre-requisites

It is necessary to have a Modbus TCP client device operative and well connected to the corresponding Modbus port

of Intesis and a Modbus RTU slave connected to its corresponding port as well.

Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not

supplied by HMS Industrial Networks S.L.U for this standard integration.

Items supplied by HMS Networks for this integration are:

• Intesis gateway.

• Link to download the configuration tool.

• Product documentation.

Intesis MAPS. Configuration & monitoring tool for Intesis Modbus series

3.2.1 Introduction

Intesis MAPS is a Windows

compatible software developed specifically to monitor and configure Intesis Modbus

series.

The installation procedure and main functions are explained in the Intesis MAPS User Manual. This document can

be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product

website at www.intesis.com

In this section, only the specific case of Modbus Router systems will be covered.

Please check the Intesis MAPS user manual for specific information about the different parameters and how to

configure them.