Instructions

Intesis
TM
INMBSSAM001R000
User’s Manual r1.3 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
23 / 23
indoor unit. (When communication has stopped
for 3 minutes after detecting indoor unit and
wired remote control)
602
602
Communication error
Communication error between the Master and
Slave wired remote controller. (Only one Master
and one Slave can exist).
604
604
Communication error
Tracking 10 or more errors between wired
remote control and indoor unit.
606
606
Installation error
-COM1, Com2 crossing connection error.
-When wired remote is connected to indoor unit
COM1 (F1, F2) terminals.
607
607
Configuration error
-Multiple Master error. (When using Master
remote control).
-Error occurs when two wired remotes are both
set as Master in one COM line.
609
609
Configuration error
Indoor unit is not installed. (when the indoor
unit is not detected after outside gearing option
setting and tracking are finished). In case of
using outside gear control.
618
618
Configuration error
-Exceeded maximum no. of installation for
indoor units.
-A reset is required after checking the number
of indoor unit.
619
619
Configuration error
-Mixed installations for °C/F° indoor unit. (Only
detected on master wired remote control).
-Error occurs when mixed indoor units of °C and
°F settings are installed.
620
620
Configuration error
-Wired remote control °C/°F setting error.
-This error occurs if the indoor unit is set in °C
while the wired remote is set in °F or vice versa.
621
621
Configuration error
This error occurs when the option setting of the
Master and Slave wired remote controls are
different from each other.
627
627
Configuration error
Slave wired remote control installation error
(when two Slave wired remote controls are
installed).
EA
EA
Configuration error
Wired remote controller COM2 option setting
error.
65535
(-1)
N/A
INMBSSAM001R000
Error in the communication of
INMBSSAM001R000 or Remote Controller with
the AC unit.
In case to detect an error code not listed, contact your closest Samsung technical support
service.