User's Manual

(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
SAVE THESE INSTRUCTIONS
English
Page 6
• Poolmustbelledwithwaterpriortoinstallation.Twoadultsrequired.
•
Tools required:
onePhilipscrewdriver,oneatscrewdriverandonesmalladjustable
wrench.
• Pool size requirements:
Pool water depth: 100cm (39 inch) minimum.
Pool length: 4.6m (15') minimum.
Pool width: 2.5m (8.2') minimum.
Transformer Location Requirement
1.
The transformer must be installed on a solid level and vibration-free area.
2.
Providealocationprotectedfromtheweather,moisture,rain,splashingwater,ooding
and freezing temperature.
3.
Provide adequate access, space and lighting for routine maintenance.
4.
The transformer requires free circulation of air for cooling.
Swim-Trainer Unit and Support Bracket Assembly, for all type of pools.
NOTE: Make sure the pool wall is able to support a load of 25 kg (55 Lbs) or more
before installation.
Model:
SM24101
Voltage:
 Transformerinput110-120VAC/60Hz8A
  Transformeroutput24VDC35A
Suitable for:
In ground pool or Intex above ground metal frame pools
Pool water temperature range:
25ºC - 35ºC
* Approximate
PRODUCT SPECIFICATIONS
SETUP INSTRUCTIONS
Speed Setting*
1 2 3 4 5 6 7 8
m/s
0.66 0.77 0.83 0.94 0.98 1.06 1.16 1.21
ft/s
2.17 2.53 2.72 3.08 3.22 3.48 3.81 3.97
This device generates a constant flow of pool water that allows the user to swim
uninterrupted in the swimming pool.
25
20
24
22