User's Manual

(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
SAVE THESE INSTRUCTIONS
English
Page 12
2. Swim-Trainer Unit Assembly (see gures 6.4 to 6.5).
• Be sure the swim-trainer unit“supportbracket”isclosedbeforeinstallingthe
swim-trainer unitontothemountingbracketassembly
(see gure 6.4)
.
• Adjust the support nuts on the
swim-trainer unit until the swim-trainer
unit is horizontal with the water surface
(see figure 6.5)
.
Swim-Trainer Unit height adjustment
and display panel assembly, for all
types of pools
1.
The swim-trainer unit must be submerged
in water with only the top surface of the
 housingexposed.Lockthenutsinplace
after the height of the swim-trainer unit
is adjusted
(see figure 7)
.
2.
Attach the display panel
(16)
onto the
swim-trainer unitmountingbracket.
Connect the display cable plug to the
display panel receptacle. Tighten up the
display cable collar nut
(see figure 8)
by
 hand.Makesurethedisplaycableplugis
firmly attached and the collar nut is
securely tightened.
3.
Place the flat magnetic end of the
emergency stop lanyard
(19)
on the
swim-trainer unit
(32)
housing in order
to activate the unit
(see figure 8)
.
IMPORTANT:
During an emergency
situation, pull the emergency stop
lanyard handle, the unit will stop and
 thedisplaypanelwillgoblank.
8
16
32
19
SETUP INSTRUCTIONS (continued)
6.5
Water level
7
Water level
X X
6.4
4
22
Max