User's Manual
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
SAVE THESE INSTRUCTIONS
English
Page 13
Connecting the swim-trainer unit to the
transformer (see gures 9.1 to 9.2)
.
1.
Be sure the transformer
(2)
switch is
OFF, connect the transformer cable to
a grounded electrical outlet.
2.
Transformermustbexedtoasolid,
level ground or base. Connect the
swim-trainer unit power cable plug into
the transformer power receptacle. Be
sure the plug collar is securely tightened
(see gure 9.1 to 9.2)
.
3.
Position the transformer 2m or more away
from the pool, so as to prevent children
from climbing on it and accessing the pool.
4.
Test the GFCI or RCD before use:
a) Pressthe“RESET”button.The
indicatorontheRCDshouldbe“ON”.
b) Pressthe“TEST”button.Theindicator
ontheRCDshouldbe“OFF”.
c) Pressthe“RESET”buttonagainto
start using the product.
d) Do not use the product if the test
failed.Contactaqualiedelectricianto
inspecttheelectricaloutletsocket.
5.
Turn the transformer switch ON.
NOTE:
To reactivate the swim-trainer unit after the emergency stop lanyard is pulled,
replacetheemergencystoplanyardbackintotheswim-trainer unit, unplugged and
re-plugged the power cable from the transformer.
SETUP INSTRUCTIONS (continued)
425mm
6.4mm
9.2
9.1
ON/OFFSwitch
Fuse Box
Power
receptacle