Owner`s manual

(122PO) DELUXE WALL MOUNT SURFACE SKIMMER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U 05/16/2013
122
PO
S AVE THESE INSTRUCTIONS
English
Page 8
SETUP INSTRUCTIONS (continued)
3
Place the basket (4), cover rim (2) and the floating cover (1) into
the skimmer (5). NOTE: The cover rim must be installed in place
in order to hold the floating cover in position.
EASY-SET
®
POOL
METAL FRAME POOL
1
2
4
5
Inside of the
Pool Wall
Inside of the
Pool Wall
Inside of the
Pool Wall
Inside of the
Pool Wall
4
The floating cover (1) should be floating off the skimmer (5) by 1"
to 5" (2.5cm to 12.7cm). Loosen the skimmer screw, slide the
skimmer up and down on the assembled hook to adjust the height.
Hand tight the screw when done.
1”- 5”
(2.5CM-12.7CM)
EASY-SET
®
POOL
METAL FRAME POOL
IMPORTANT: The skimmer must stay vertical at all times, so that the top of
the floating cover can parallel to the water surface for skimming.
1”- 5”
(2.5CM-12.7CM)