(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO OWNER’S MANUAL IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. PureSpa™ SSP-H-10-2 110-120 V~, 60 Hz, 12 A For illustrative purposes only. Do not forget to try these other fine Intex products: pools, pool accessories, in-home toys, airbeds and boats available at fine retailers or visit our website.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English TABLE OF CONTENTS Warning.......................................................................................... 3-4 Parts............................................................................................... 5-6 Set-up............................................................................................. 7-11 Operation.......................................................................................
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English IMPORTANT SAFETY INSTRUCTIONS 254 PO When installing and using this electrical equipment, basic safety precautions should always be followed, including the following. READ AND FOLLOW ALL INSTRUCTIONS DANGER • Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at all times. • Risk of drowning.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English WARNING j) Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness. The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia. The causes, symptoms, and effects of hyperthermia may be described as follows: Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F (37°C).
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English PARTS Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 20 21 19 14 13 12 24 17 15 16 18 6 26 4 27 3 2 29 8 22 10 11 28 23 1 9 5 30 25 7 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English PARTS (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. REF. NO.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English PRODUCT SPECIFICATIONS Maximum seating capacity: Water capacity: Inner/outer diameter: Height: Bubble air blower: Filter pump flow rate: Heater power: Temperature range: Temperature rise: Number of Bubble Jets: Spa tub recommended working air pressure: 4 adults 6 adults 210 gal (795 L) 290 gal (1098 L) 57/77 in (145/196 cm) 65/85 in (165/216 cm) 28 in (71 cm) 1.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English SET UP (continued) • Humidity is a natural side effect of indoor spa installation. The room shall be properly ventilated to allow moisture to escape. Install a ventilating system to prevent excess condensation, moisture in the room. Additional requirements for outdoor installation • Spa owners may need to comply with local or states laws relating to childproof fencing, safety barriers, lighting, and other safety requirements.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English SET UP (continued) 2. 3. 4. Press the button located on top of the control base and remove the back cover (see drawing 3). Unscrew the control base inflation cap (5) to reveal the air blower inflation outlet, insert one end of the inflation hose (7) into the outlet and turn to the right to lock it (see drawing 4). Unscrew the air valve cap to reveal the stem in the up position for inflation.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English SET UP (continued) IMPORTANT The spa tub inflation/deflation valve incorporates an “air pressure release” function that automatically releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar). Air pressure release valve. Inflation of spa in the morning. Colder temperatures at night cause the spa to seem less inflated. Air expands in the midday heat and correct air pressure is restored.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English SET UP (continued) Spa Control Unit Installation 1. 2. Connect the spa control unit to the spa tub (see drawing 10). Hand-tighten the connectors securely. Do not use tools to tighten. Reinstall the back cover (2) to the spa control base (see drawing 11). CAUTION: Back cover must be installed before using the SPA. Do not sit, lean, cover or place any objects over the spa control unit. 11 10 2 3. 4. 5. 6. 7.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English OPERATION SPA CONTROL UNIT PANEL F E G 104 F o D A B H C A: B: C: D: E: F: G: H: Heat Button Celsius/Fahrenheit Toggle Button Temperature Increase Button Temperature Decrease Button Water Filter Button Bubble Button LED Display On/Off Button On/Off Button: Once the unit is plugged in, use this button to active the control unit panel buttons. The light next to the button is green when activated.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English LED CODE CHART LED Reading E90 E94 E95 E96 CAUSE SOLUTION No water flow • Turn off and unplug the control unit. • Ensure the outlet cover grid is clean and free from obstructions. • Clean or replace the cartridge, see Maintenance and Storage section. • Ensure the in/outlet connections on the spa tub and filter pump are not blocked. • Keep the spa water properly sanitized to ensure a clean and unclogged filter cartridge.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO MAINTENANCE AND CHEMICALS WARNING Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product. Water Sanitation The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English SPA WATER CHEMISTRY AND BALANCE Preferred Water Chemistry Reading Free Chlorine pH Total Alkalinity (TA) Calcium Hardness (CaCO3) Saturation Index (SI) Water Temperature Minimum 2 ppm 7.2 60 ppm 100 ppm –0.3 20ºC / 68ºF Ideal 2 - 4 ppm 7.2 - 7.6 80 ppm 150–250 ppm 0 20–40ºC / 68–104ºF Maximum 5 ppm 7.8 120 ppm 350 ppm +0.3 40ºC / 104ºF Free chlorine: is the chlorine residual present in the spa water.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO SPA WATER CHEMISTRY AND BALANCE (continued) SPA Water Adjustment How to adjust the spa water chemistry when the levels are off the range. CAUTION: Always follow the chemical manufacturer’s directions, and the health and hazard warnings. Total Alkalinity (TA) Adjustment Remove the spa cover to aerate the water and use the included test strips to check the chemistry level.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO SPA WATER CHEMISTRY AND BALANCE (continued) Lowering pH Lowering pH Using Muriatic Acid Volume Total Alkalinity 8.4→7.2 From→To 7.8→7.2 210 gal (795 L) 120 ppm 80 ppm 0.028 qt 0.018 qt 26 mL 18 mL 0.019 qt 0.013 qt 18 mL 12 mL 290 gal (1098 L) 120 ppm 80 ppm 0.038 qt 0.025 qt 36 mL 24 mL 0.026 qt 0.017 qt 22 mL 16 mL Lowering pH Using Sodium Bisulfate Volume Total Alkalinity 8.4→7.2 From→To 7.8→7.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 254 PO English MAINTENANCE Spa Tub Drainage 1. 2. 3. 4. 5. 6. 7. 8. 9. 14 Turn off the spa control unit. Connect the drain valve adaptor to a garden hose and point the other end of the garden hose to a suitable draining area (see drawing 14). Remove the drain valve cap from outside of the spa tub and attach the drain valve adaptor to the drain valve (see drawing 14).
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 254 PO English MAINTENANCE (continued) Spa Tub and Cover Air Bladder Repair Use the enclosed repair patch to repair any puncture: • Clean and dry the area to be repaired thoroughly. • Remove the patch backing paper and press patch firmly over the puncture. Smooth out the surface to remove any air bubbles under the patch. STORAGE 1. 2. 3. 4. 5. 6. 7. 8. Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO TROUBLESHOOTING PROBLEM CAUSE Spa is unplugged or off. Control panel cable plug loose. Power failure. GFCI/RCD tripped. GFCI/RCD broken. SOLUTION • Ensure the spa is plugged and switched on. • Ensure the control panel cable plug is firmly attached to the control base receptacle. • Check power source. • Reset the GFCI/RCD. • Contact Intex Service Center.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English FILTER PUMP MOTOR DISASSEMBLY IMPORTANT: You must drain out any remaining water inside the piping system of the control base before replacing any parts. Tools required: One adjustable wrench and one Philip screwdriver. 1 2 3 4 5 6 NOTE: The “special wrench tool” is included with the new filter pump motor replacement and not with the spa set.
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018 English 254 PO WARRANTY Your PureSpa has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the PureSpa listed below. The provisions of this Limited Warranty apply only to the original purchaser and is not transferable.