(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO OWNER’S MANUAL IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. PureSpa™ SJB-HS-10-1 / SJB-HS-11 110-120 V~, 60 Hz, 12 A For illustrative purposes only. Do not forget to try these other fine Intex products: pools, pool accessories, in-home toys, airbeds and boats available at fine retailers or visit our website.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English TABLE OF CONTENTS Warning.......................................................................................... 3-4 Parts............................................................................................... 5-6 Product Specifications................................................................. 7 Set-up.............................................................................................
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English IMPORTANT SAFETY INSTRUCTIONS 264 PO When installing and using this electrical equipment, basic safety precautions should always be followed, including the following. READ AND FOLLOW ALL INSTRUCTIONS DANGER • Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at all times.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English WARNING j) Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness. The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia. The causes, symptoms, and effects of hyperthermia may be described as follows: Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English PARTS Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 11 22 21 5 19 14 13 12 15 17 28 23 16 25 18 6 4 3 A B C 32 D 33 34 31 35 1 36 7 30 29 26 10 C 20 A 9 24 B 27 2 8 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English PARTS (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 DESCRIPTION QTY.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English PRODUCT SPECIFICATIONS Maximum seating capacity: Water capacity: Inner/outer diameter: Height: Jet pump: Bubble air blower: Filter pump flow rate: Heater power: Temperature range: Temperature rise: Number of Water Jet Nozzles: Number of Bubble Jets: Spa tub recommended working air pressure: 4 adults 6 adults 210 gal (795 L) 290 gal (1098 L) 59/79 in (150/201 cm) 66/86 in (168/218 cm) 28 in (71 cm) 0.9 HP / 120 V / 60 Hz 0.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 264 PO English SET UP (continued) Setup the spa with at least 2 persons. 1. 2. Move the entire package to the selected site. Do not drag the spa tub across the ground as this can cause damage and leakage. Open the carton carefully as this carton can be used to store the spa during long term storage or when not in use. Lay out all the parts on the ground and make sure all the parts are accounted for.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English SET UP (continued) 4. 5. Press the button to turn on the control unit panel buttons first. Press the spa tub wall until it is firm to the touch but not hard (see drawing 5). IMPORTANT: Do not over inflate or use high pressure air compressor to inflate. Press the button again to turn it off. 3 button to inflate the 1 4 2 9 24 7 5 6 1 2 6. 7.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English SET UP (continued) Deflation For Spa Tub Wall: 1. 2. 3. 8 Unscrew the cap to reveal the stem, push the stem in and turn 90 degree right to secure it in the down position (see drawing 8). Once the deflation is completed, push the stem in and turn 90 degree left to return it to the inflation position. Replace the cap back. For Cover Air Bladder: 1. 2. Pull valve cap out and squeeze the valve at its base until deflated.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English SALT LEVEL INFORMATION The spa comes with a built-in saltwater sanitation system. Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the installation of the device, a measured quantity of salt is dissolved in the SPA water to make it slightly salty. The SPA water flows through the sanitation system’s electrolytic cell to produce chlorine.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO OPERATION SPA CONTROL UNIT PANEL F H J E G A , B C I D A: B: C: D: E: F: G: H: I: J: Heat Button Celsius/Fahrenheit Toggle Button Temperature Increase Button Temperature Decrease Button Water Filter Button Water Jet Button Sanitizer button LED Display On/Off Button Bubble Button On/Off Button: Once the unit is plugged in, use this button to active the control unit panel buttons.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO SANITATION SYSTEM OPERATING INSTRUCTIONS 1. Activate the sanitation system: Press the sanitizer button on the control panel, this will activate the sanitation system as well as the filter pump. The sanitizer icon and the filter icon turn green. Flashing code “003H” appears on the control panel’s LED, indicating that the unit is ready to be programmed. 2.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English MAINTENANCE AND CHEMICALS WARNING Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product. Water Sanitation The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO SPA WATER CHEMISTRY AND BALANCE (continued) Calcium Hardness (CaCO3): refers to the amount of calcium and magnesium dissolved in the water. Result if too low – Difficulty balancing water, corrosion of metal components, eye & skin irritation and water foaming. Result if too high – Scale formation, cloudy water, eye & skin irritation, difficulty balancing water and filter/ heater inefficiency.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO SPA WATER CHEMISTRY AND BALANCE (continued) Lowering Total Alkalinity Amount of Sodium Bisulfate to lower Total Alkalinity Desired level Volume: 210 gal / 795 L Volume: 290 gal / 1098 L 60 ppm 0.269 Lb 121 g 0.368 Lb 168 g 80 ppm 0.358 Lb 161 g 0.492 Lb 224 g 100 ppm 0.448 Lb 202 g 0.614 Lb 279 g 120 ppm 0.528 Lb 238 g 0.737 Lb 335 g 140 ppm 0.627 Lb 283 g 0.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO SPA WATER CHEMISTRY AND BALANCE (continued) Raising pH Raising pH Using Sodium Bicarbonate Volume Total Alkalinity From→To 6.8→7.2 210 gal (795 L) 120 ppm 80 ppm 0.541 Lb 0.361 Lb 243 g 163 g 290 gal (1098 L) 120 ppm 80 ppm 0.737 Lb 0.491 Lb 335 g 224 g Calcium Hardness Adjustment Use the included test strips to check the water hardness level and adjust it following below chart.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English MAINTENANCE Maintenance of Spa Water and Cartridge Protect all the spa occupants from possible water-related illnesses by keeping the spa water clean and sanitized. Always practice good hygiene. To ensure proper spa water quality follow these procedures: 1. Inspect and clean the filter cartridge once a week, and change the filter cartridge as needed. a.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English MAINTENANCE (continued) 4. Unplug the electrolytic cell cord. Unscrew the electrolytic cell nut in a counter-clockwise motion using the included electrolytic cell nut wrench (20). 5. Pull out the electrolytic cell and place it in a container, pour kitchen grade vinegar into the container to soak the titanium plate for about one hour until no deposits remain. 6.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 264 PO English MAINTENANCE (continued) Spa Tub Drainage 1. 2. 3. 4. 5. 6. 7. 8. 9. Turn off and unplug the spa control unit. Connect the drain valve adaptor to a garden hose and point the other end of the garden hose to a suitable draining area (see drawing 12). Remove the drain valve cap from outside of the spa tub and attach the drain valve adaptor to the drain valve (see drawing 12).
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 264 PO English MAINTENANCE (continued) Spa Tub and Cover Air Bladder Repair Use the enclosed repair patch to repair any puncture: • Clean and dry the area to be repaired thoroughly. • Remove the patch backing paper and press patch firmly over the puncture. Smooth out the surface to remove any air bubbles under the patch. IMPORTANT The ambient temperatures of air have an effect on the spa tub internal pressure.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO TROUBLESHOOTING PROBLEM CAUSE Spa is unplugged or off. Control panel cable plug loose. Power failure. GFCI/RCD tripped. GFCI/RCD broken. SOLUTION NO DISPLAY/SPA CONTROL UNIT DOES NOT WORK • • • • • • Ensure the spa is plugged and switched on. • Ensure the control panel cable plug is firmly attached to the control base receptacle. • Check power source. • Reset the GFCI/RCD. • Contact Intex Service Center.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO TROUBLESHOOTING (continued) PROBLEM CAUSE SOLUTION TUB HAS A STRANGE SHAPE • Expanded internal air pressure by strong sunshine. • Do not expose the spa to direct sunlight for extended period of time. • Check the air pressure and release air if necessary. During very hot weather, you must check to see whether it is necessary to release some air. This is to avoid any possible damage to the tub.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO TROUBLESHOOTING (continued) LED PANEL CODE PROBLEM SOLUTION LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). • No water flow. • • • • • • E90 • • Turn off and unplug the control unit. Ensure the outlet cover grid is clean and free from obstructions. Clean or replace the cartridge, see Maintenance and Storage section.
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/19/2016 English 264 PO WARRANTY Your PureSpa has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the PureSpa listed below. The provisions of this Limited Warranty apply only to the original purchaser and is not transferable.
