User Manual

ManualsBrandsIntex ManualsFilters & Filter MediaIntex 28633EG Krystal Clear Cartridge Filter Pump for Above Ground Pools, 2500 GPH Pump Flow Rate, 110-120V with GFCI

109

(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013

English

109

English

OWNER’S MANUAL

Krystal Clear™

Model 633T

Filter Pump

IMPORTANT

SAFETY RULES

Read, understand, and follow

all instructions carefully before

installing and using this product.

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, Visit

www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

Monday through Friday, 8:30am to 5:00pm Pacific Time

Don’t forget to try these other fine Intex products: pools, pool accessories,

inflatable pools and in-home toys, airbeds and boats available at fine

retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves the right

to change specifications and appearance, which may result in updates to

the instruction manual without notice.

For illustrative purposes only.

109-***-R0-1406

Summary of content (16 pages)

PAGE 1
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 OWNER’S MANUAL IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Krystal Clear™ Model 633T Filter Pump For illustrative purposes only. Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website.
PAGE 2
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English TABLE OF CONTENTS Warnings.......................................................................... 3 Parts Reference.............................................................. 4-5 Setup Instructions.......................................................... 6-8 Operating Instructions................................................... 9 Operating Time Table......................................................
PAGE 3
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Children must stay away from this product and electrical cord(s). • Assembly and disassembly by adults only.
PAGE 4
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 1 2 3 4 5 6 7 8 3 2 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. REF. NO. DESCRIPTION QTY. SPARE PART NO.
PAGE 5
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. * 17 11 12 13 14 15 9 10 * 17 11 12 13 14 16 9 10 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. DESCRIPTION REF. NO. QTY. SPARE PART NO.
PAGE 6
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional) The strainer grid prevents large objects from jamming and/or damaging the filter pump. The plunger valve assembly prevents water from flowing into the filter pump while the filter cartridge is being placed or cleaned. If your pool has inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring.
PAGE 7
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (14) (see drawing 5). Be careful not to lose the step rubber washer (11). Place the plunger valve on the ground in a safe place. 2. In a counter-clockwise motion unscrew the strainer nut (12) from the threaded connector (14). Leave the flat washer (13) on the connector (14).
PAGE 8
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English FILTER PUMP HOSE CONNECTION SETUP 1. Remove the Krystal Clear™ filter pump and hoses from the packaging. 2. Place the filter pump in such a manner, that you can easily assemble the hose (8) connections to the plunger valve. Note: Some regional regulations may require the filter pump to be mounted on a stationary platform. There are two mounting holes located in the pump base for this reason.
PAGE 9
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English OPERATING INSTRUCTIONS 1. Make sure the filter pump is switched off. The switch is located on the motor housing. 2. Connect the power cord to a GFCI protected electrical outlet. WARNING Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.
PAGE 10
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 OPERATING TIME TABLE This table shows the required operating time for average use of the filter pump with AGP's. The filter pump running time should be 1 hour longer than the required operating time of the Saltwater System.
PAGE 11
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 POOL CARE AND CHEMICALS • • • • • • • • All pools require care to keep the water clear and hygienically clean. With proper chemical control, your filter will help attain this objective. Consult your pool supply dealer for instructions regarding the proper use of chlorine, algaecide and other chemical agents required for sparkling clear water. Keep pool chemicals away from children.
PAGE 12
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English CLEANING OR REPLACING FILTER CARTRIDGES (continued) 7. Examine the inside of the filter housing. 8. If dirt or sediment is located on the bottom of the housing then: A. In a counter-clockwise motion gently unscrew and remove the sediment valve (2) located at the bottom of the housing. Place it in a safe place. B. With a bucket of water or a garden hose pour water into the housing flushing out the sediment. C.
PAGE 13
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 TROUBLESHOOTING GUIDE TROUBLE CAUSE SOLUTION FILTER MOTOR FAILS TO START • The motor is not plugged in. • The GFCI circuit breaker is tripped. • Motor too hot and overload protection shut motor off. • Filter cord must be plugged into a 3 wire outlet that is protected by a Class A Ground Fault Circuit Interrupter. • Reset circuit breaker. If circuit breaker trips repeatedly, your electrical system may have a defect.
PAGE 14
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English COMMON POOL PROBLEMS PROBLEM DESCRIPTION CAUSE SOLUTION ALGAE • Greenish water. • Green or black spots on pool liner. • Pool liner is slippery and/or has a bad odor. • Chlorine and pH levels need adjustment. • Super chlorinate with shock treatment. Correct pH to your pool store's recommended level. • Vacuum pool bottom. • Maintain proper chlorine level.
PAGE 15
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all instances or risk and or danger.
PAGE 16
(109) MODEL 633T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013 English 109 LIMITED WARRANTY PARTS LIST Your Krystal Clear™ Filter-Pump has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Krystal Clear™ Filter-Pump and accessories listed below.