User Guide

(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2014
260
PO
SAVE THESE INSTRUCTIONS
English
Page 6
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Commonsalt(sodiumchloride)ismadeupoftwoelements,sodiumandchloride.Duringthe
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System ’s electrolytic cell to
produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and
algae. It also oxidizes all other organic materials.
HOW THE CHLORINE IS GENERATED
PRODUCT SPECIFICATIONS
Hose from
Filter Pump
Flow Sensor
Electronic
Control Station
Power Supply
Electrolytic Cell
Power Switch
Hose Returning
Water to Pool
E.C.O.
Electrodes
TheElectrocatalyticOxidation(E.C.O.)isanAdvancedOxidationProcesses(AOPs).When
direct current is applied to the electrocatalytic oxidation electrodes, water will be discharged to
generate “hydroxyl radicals”. The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
HOW THE ELECTROCATALYTIC OXIDATION WORKS
Model: ECO 7110 ECO 8110
Power 110 - 120 Volt AC 110 - 120 Volt AC
Amperage 0.6 A 1.1 A
Wattage: 65 W 125 W
Ideal Salt Level: 3000 ppm (partspermillion) 3000 ppm (partspermillion)
E.C.O. Cell Output Current: 500 mA 800 mA
Maximum Chlorine Output/hour: 5 grams/hour 12 grams/hour
Filterpump minimum flow rate: 700 ~ 3000 gallons/hour
(2650-11355liters/hour)
700 ~ 3000 gallons/hour
(2650-11355liters/hour)
Limited Warranty: see “Limited Warranty”