User Guide

(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2014

260

SAVE THESE INSTRUCTIONS

English

Page 7

SETUP INSTRUCTIONS

. Assembletheabove-ground-pool(AGP)anditsfilterpumpaccordingtotheirinstallation

instructions.

. Take the Saltwater System and its accessories out of the packaging.

. Place the Saltwater System in line after the filter pump.

. Connect the connector hose

(7)

to the Saltwater System inlet.

Connecting the system to pump and pool with 1-1/4” (32mm) connections/

hoses:

The saltwater system features 1-1/2” (38mm) connections. It is accordingly supplied

with adaptors A (1) and B (8) for connecting to the small 1-1/4” (32mm) diameter

connections/hoses. Install as follows:

Drawing #1

IMPORTANT

• TheSaltwaterSystemrequiresaseparatefilterpump[700~3000 gph (2650~

11355 lph)] to drive the water and function properly.

• TheSaltwaterSystemmustbeinstalledasthelastpieceofpoolequipmentinthe

water return line to the pool as displayed in Drawing #1. This location extends the

life of the titanium plates.

WATER TO

POOL

WATERFROM

POOL

ID1-1/4”(32mm)

HOSE

ID 1-1/4”

(32mm)HOSE

SALTWATER SYSTEM WITH E.C.O.

(ELECTROCATALYTICOXIDATION)

FILTER

PUMP

SWIMMINGPOOL

Please visit

www.intexcorp.com

for the latest instructional video on the

installation and operation of this product.