User Guide

(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2014

260

SAVE THESE INSTRUCTIONS

English

Page 8

SETUP INSTRUCTIONS (continued)

. Godirectlytostep2ifyourpoolisempty.Ifyourabove-ground-poolisfilledwithwater,

unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs

into the connectors, before installing the saltwater pool system.

. Connect the adaptor A

(1)

to the electrolytic cell

(3)

outlet as shown in Drawing #1. Tighten

securely.

. Disconnect the water return hose from the filter pump connection and connect it to the

adaptor A

(1)

ontheSaltwaterSystemwithahoseclamp.(seeDrawing#1)

. ConnectadaptorB

(8)

to the connector hose

(7)

.Tightensecurely.(seeDrawing#1)

. ConnectadaptorB

(8)

tofilterpumpoutlet(lowerconnection).Tightensecurely.

. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return

the strainer grids to the strainer connectors.

Filter

Pump