User Guide

(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/07/2014

260

SAVE THESE INSTRUCTIONS

English

Page 9

SETUP INSTRUCTIONS (continued)

Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses:

Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (8).

Install as follows:

Drawing #2

. Godirectlytostep2ifyourpoolisempty.Ifyourabove-ground-poolisfilledwithwater,

close the plunger valves before installing the Saltwater System.

. Disconnect the water return hose from the filter pump connection and connect it to the

Saltwater System outlet.

. Connect the connector hose

(7)

to the filter pump outlet connection.

. Open the plunger valves to allow the water to flow.

FILTER

PUMP

ID1-1/2”(38mm)

HOSE

ID1-1/2”(38mm)

HOSE

SALTWATER SYSTEM WITH E.C.O.

(ELECTROCATALYTICOXIDATION)

SWIMMINGPOOL

WATER TO

POOL

PLUNGER

VALVE

WATERFROM

POOL