(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 OWNER’S MANUAL English 107 IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Krystal Clear™ Model 635T Filter Pump For illustrative purposes only. Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 TABLE OF CONTENTS English Warnings.......................................................................... 3 Parts List & Reference.................................................... 4-6 Setup Instructions ......................................................... 7-9 Operating Instructions .................................................. 10 Operating Time Table......................................................
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 SAFETY RULES English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Children must stay away from this product and electrical cord(s). • Assembly and disassembly by adults only.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 PARTS LI ST English PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 PARTS REFERENCE English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 1 2 3 4 5 6 3 2 7 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. REF. NO. DESCRIPTION QTY. SPARE PART NO.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 PARTS REFERENCE English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 10 11 12 13 14 8 9 10 11 12 13 8 9 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. REF. NO. DESCRIPTION 8 PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED) QTY. SPARE PART NO.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 SETUP I NSTRUCTIONS English POOL OUTLET - STRAINER & PLUNGER VALVE SETUP The strainer grid prevents large objects from jamming and/or damaging the filter pump. The plunger valve assembly prevents water from flowing into the filter pump while the filter cartridge is being placed or cleaned. If your pool has inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 SETUP I NSTRUCTIONS English POOL INLET - NOZZLE & PLUNGER VALVE SETUP 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (13) (see drawing 5). Be careful not to lose the step rubber washer (10). Place the plunger valve on the ground in a safe place. 2. In a counter-clockwise motion unscrew the strainer nut (11) from the threaded connector (13).
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 SETUP I NSTRUCTIONS English FILTER PUMP HOSE CONNECTION SETUP 1. Remove the Krystal Clear™ filter pump and hoses from the packaging. 2. Place the filter pump in such a manner, that you can easily assemble the hose (7) connections to the plunger valve. Note: Some regional regulations may require the filter pump to be mounted on a stationary platform. There are two mounting holes located in the pump base for this reason.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 OPERATI NG I NSTRUCTIONS English OPERATING INSTRUCTIONS 1. Make sure the filter pump is switched off. The switch is located on the motor housing. 2. Connect the power cord to a GFCI protected electrical outlet. WARNING Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI).
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 English 107 OPERATING TIME TABLE This table shows the required operating time for average use of the filter pump with AGP's. The filter pump running time should be 1 hour longer than the required operating time of the Saltwater System.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 MAI NTENANCE English CLEANING OR REPLACING FILTER CARTRIDGES It is recommended that the filter cartridge be replaced at least every 2 weeks. 1. Make sure the filter pump is turned off, then disconnect the power cord from the electrical outlet. 2. Grasp a plunger valve handle. Turn the handle counter-clockwise, push down until it stops and then turn it clockwise until the plastic protruding notch anchors in the "0/1" position.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 MAI NTENANCE English POOL CARE & CHEMICALS • All pools require care to keep the water clear and hygienically clean. With proper chemical control, your filter will help attain this objective. Consult your pool supply dealer for instructions regarding the proper use of chlorine, algaecide and other chemical agents required for sparkling clear water. Keep pool chemicals away from children.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 TROUBLESHOOTING GUIDE TROUBLE CAUSE SOLUTION FILTER MOTOR FAILS TO START • The motor is not plugged in. • The fuse box needs checking. • The GFCI circuit breaker is tripped. • Motor too hot and overload protection shut motor off. • Filter cord must be plugged into a 3 wire outlet that is protected by a Class A Ground Fault Circuit Interrupter. • Reset circuit breaker.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 COMMON POOL PROBLEMS TROUBLE DESCRIPTION CAUSE SOLUTION ALGAE • Greenish water. • Green or black spots on pool liner. • Pool liner is slippery and/or has a bad odor. • Chlorine and pH levels need adjustment. • Super chlorinate with shock treatment. Correct pH to your pool store's recommended level. • Vacuum pool bottom. • Maintain proper chlorine level.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 107 SAFETY GUIDELINES English GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all risks and dangers.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 English 107 LIMITED WARRANTY LIST using the highest quality Your Krystal Clear™ Filter-Pump has PARTS been manufactured materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Krystal Clear™ Filter-Pump and accessories listed below.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 English COUNTRIES/REGIONS SERVICE CENTER LOCATIONS • UNITED STATES • CANADA INTEX RECREATION CORP. 1665 Hughes Way Long Beach, CA 90801 Tel: 1-800-234-6839 Fax: 310-549-2900 Website: www.intexcorp.com (U.S./Canada only) Consumer Service Hours: 8:30 am to 5:00 pm Pacific Time, Mon. thru FRI. only. • MEXICO KAY INTERNACIONAL, S.A. DE C.V. SAN JERONIMO # 550- INT.501 Y 502. COL. JARDINES DEL PEDREGAL. C.P. 01900 MÉXICO D.F.
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/16/2011 INTEX ® English For Residents of the U.S. & Canada: INTEX RECREATION CORP. Attn: Consumer Service 1665 Hughes Way Long Beach, CA 90801 Phone: 1-800-234-6839 Fax: (310) 549-2900 Consumer Service Hours: 8:30 am to 5:00 pm Pacific time Monday thru Friday only Website: www.intexcorp.com For Residents outside of the U.S. and Canada: Please refer to the Service Center Locations ©2011 Intex Marketing Ltd. - Intex Development Co. Ltd.