(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 OWNER’S MANUAL English 131 IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Krystal Clear ® Saltwater System Model CS8110 For illustrative purposes only. Don’t forget to try these other fine Intex products: Pools, Pool Accessories, Inflatable Pools and In-Home Toys, Airbeds and Boats available at fine retailers or visit our website listed below.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English TABLE OF CONTENTS Warnings............................................................................... 3 Parts References................................................................... 4-5 Product Information & Specifications................................ 6 Setup Instructions................................................................ 7-11 Salt & Pool Water Volumes.........................................
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Children must stay away from this product and all electrical cords. • Assembly and disassembly by adults only.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 13 1 5 12 3 17 6 16 7 11 4 18 2 8 9 10 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. REF. NO. DESCRIPTION QTY. SPARE PART NO.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English HOW THE CHLORINE IS GENERATED This product is specially designed for above ground pools. It will destroy the bacteria, oxidize bather organics and control algae, which provide a safe, clean and comfortable swimming pool. Common salt (sodium chloride) is made up of two elements, sodium and chloride.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English SETUP INSTRUCTIONS IMPORTANT • The Saltwater System requires a separate filter pump [700~4000 gph (2650~15140 lph)] to drive the water and function properly. • The Saltwater System must be installed as the last piece of pool equipment in the water return line to the pool as displayed in Drawing #1. This location extends the life of the titanium plates. 1.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English SETUP INSTRUCTIONS (continued) 1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water, unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs into the connectors, before installing the saltwater pool system. 2. Connect the adaptor A (1) to the electrolytic cell (4) outlet as shown in Drawing #1. Tighten securely. 4 1 3.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English SETUP INSTRUCTIONS (continued) Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses: Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (9). Install as follows: Drawing #2 PLUNGER VALVE WATER TO POOL SWIMMING POOL WATER FROM POOL FILTER PUMP ID 1-1/2” (38mm) HOSE 8 SALTWATER SYSTEM ID 1-1/2” (38mm) HOSE 1. Go directly to step 2 if your pool is empty.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English SETUP INSTRUCTIONS (continued) Connecting the system to other types of pump (with different type of thread or no thread): The Saltwater System can also be adapted to other filter pumps with different thread or those without a thread on the connection. Connection to 1-1/4” (32mm) hose: 9 8 FILTER PUMP ID 1-1/4” (32mm) CONNECTION SALTWATER SYSTEM 1. Connect one end of adaptor B (9) to the connector hose (8).
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 SETUP INSTRUCTIONS (continued) Connecting the system to other types of pool After you have connected the Saltwater System to the pump, connect it to the pool. This is depicted in Drawings #1 and #2. Following are the common connection types: Connection to 1-1/4” (32mm) connectors: HOSE CLAMP ID 1-1/4” (32mm) HOSE 1 SALTWATER SYSTEM 1. Connect the adaptor A (1) to the electrolytic cell (4) outlet.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English SALT & POOL WATER VOLUMES • Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt). However, it will take a longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda) colored salt.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 INTEX POOLS SALT TABLE This table shows the amount of salt needed to achieve and maintain the optimal 3000 ppm salt level. Pool Size Water Capacity (Calculated at Salt Needed for 90% for Frame Pool and 80% Startup for Easy Set & Oval Pool) 3.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear and clean, and to maximize the performance of the device, add cyanuric acid to the pool. We recommend that the cyanuric acid level be maintained at approximately 1% of the salt, i.e. 100 Lbs (45 Kgs) salt x1% = 1 Lbs (0.45 Kgs) cyanuric acid.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 SALT CALCULATION FORMULA FOR ALL POOLS Salt Needed for Startup (Lbs) Salt Needed for Startup (Kgs) Water Capacity (Gals) x 0.025 Water Capacity (Liters) x 0.003 Salt Needed when Salt Needed when Low Salt Detected (Lbs) Low Salt Detected (Kgs) Water Capacity (Gals) x 0.0067 Water Capacity (Liters) x 0.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English OPERATION INSTRUCTIONS 1. Turn on the filter pump. 2. Start up the unit: Plug the power cord into the electrical outlet and test the GFCI/RCD (circuit breaker). Switch on the unit. Flashing code “00” appears on the electronic control station’s LED, indicating that the unit is ready to be programmed. 3. Set operating hours for Saltwater system: With code “00” flashing, press button to set the desired operating hours.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English OPERATION INSTRUCTIONS (continued) 7. Boost cycle • If the test result is below 0.1ppm, press and hold “BOOST” button for 5 seconds until the indicator lights up and the LED display “80”. This indicates that the saltwater system has started copper ion and more chlorine sanitizer production. You can press and hold the “BOOST” button for another 5 seconds until the indicator is off, which will cancel the Boost cycle.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English MAINTENANCE IMPORTANT Unplug the power cord before cleaning your system. Also close the plunger valves on your pool or insert the black hat-like plugs in the strainer opening to prevent water spillage. After completing all maintenance tasks, you must plug the power cord back in and open the plunger valves or remove the plugs. Flow Sensor Cleaning 1.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 MAINTENANCE (continued) 3. Disconnect the 2 hoses from the Saltwater System, and assemble the cell cover (10) at each side of the cell. 4. In a counter-clockwise motion, unscrew the collar of the copper electrode (5) and remove it from the electrolytic cell (4). Lift up the copper electrode. 5. Pour kitchen grade vinegar into the cell to immerse the titanium plates.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 MAINTENANCE (continued) INTEX COPPER ION TEST STRIPS (PACKED WITH THE PRODUCT) ® The Copper Ion Test Strips can be used to test the copper ion concentration in the water. Directions and Use 1. Dip the entire strip into the water for 3 seconds, then remove it 2. Hold the strip level for 15 seconds. Do not shake excess water from the strip. 3.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Copper Ions 0 0.1 - 0.2 ppm Free Chlorine 0 0.5 - 3.0 ppm Combined Chlorine 0 0 ppm pH 7.2 7.4 - 7.6 Total Alkalinity 100 ppm 100 - 140 ppm Calcium Hardness 150 ppm 200 - 400 ppm Stabilizer (Cyanuric Acid) 10 ppm 20 - 40 ppm Maximum 0.2 ppm 5.0 ppm 0.2 ppm 7.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 TROUBLESHOOTING GUIDE PROBLEM CAUSE SOLUTION INSUFFICIENT CHLORINE • Insufficient operating hours of the Saltwater System. • The salt level in the pool water is less than 2000ppm. This is insufficient. • Chlorine loss due to intense sunlight exposure. • The bather load has increased. • Clogged or dirty electrolytic cell. • High UV level exposure. • Increase the daily Saltwater System operating time.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English TROUBLESHOOTING GUIDE (continued) LED PANEL CODE SOLUTION PROBLEM LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). 1. Filter pump not attached to system and/or switch on. • Ensure filter pump is attached and operating. See "Setup Instruction". 2. Circulation line is blocked. • If your unit has plunger valves, ensure that they are open.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English 131 GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all risks and dangers.
(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013 English LIMITED WARRANTY ® Your Krystal Clear Saltwater System has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only ® to the Krystal Clear Saltwater System and accessories listed below.