User's Manual
22
23
Ⅱ
User Manual - Main Program
3 Main Program
01. Main Program
Main Program enables users to monitor images through PC monitor.
The main program supports the following functions: record images,
search & playback images and control camera remotely. Image can
also be transmitted over the network to any remote site.
<Main Program>
1 : Control Panel
2 : Screen Partition Panel
3 : Pan/Tilt Control Panel
4 : Camera Selection Panel
5 : Audio Volume Control Bar
6 : Status Information Panel
1-1 Control Panel
Control Panel consists of the following icons: This enables users
to run search programs, manually record images and open
configuration window.
- Search Icon: Search Option.
- Configuration Icon: To change setup of program.
- Lock Icon: Supports password lock function for Server
security.
- Recording Icon and All Icon:
Record only certain channels – Enable users to manually
select certain channels for recording.
Record all channels – Click [All] icon and click [REC] icon
to record all channels.
→
Search Icon
→
Lock Icon
Configuration
←
Icon
Recording Icon
←
→
All Icon
→
❶
→
❷
→
❸
❺
❹
❻
1-3 Pan/Tilt Control Panel
Use of Pan/Tilt Camera,
1.Select correct [Receiver] protocol from
[Configuration].
2. Select the channel which is connected
to Pan/Tilt camera.
3. Click various buttons from Pan/Tilt
Control Panel to control camera.
(Pan/Tilt/Zoom/Focus).
1-2 Screen Partition Panel
Support 7 kinds of various screen
partitions, full-screen and sequence
rotation display mode etc.
[Screen Partition Panel]
Pan/Tilt
&
Zoom/Focus
Button