User's Manual

Ⅱ User Manual - Main Program
28
29
2 Store
※ Store Disk – Indicates installed HDD Capacity.
Check(√) HDD to use as recording device
Notice) Recommend to disable C Drive(Operating System
installed) as recording device and use other drives(D, E, C).
※ Overwrite – Setup overwrite to delete the oldest data when
free HDD is lesser than minimum free space allowed.
※ Setup compression quality & max stored-frame per second.
Recording size of 1 frame according to image quality &
resolution is as followings:
Image Quality Resolution Recording Size(KB)
Low 320X240 2.5
Low 640X480
6
Medium 320X240
3.7
Medium 640X480
10
High 320X240
5.0
High 640X480
15
※ Watermark
Use Watermark to prevent image tampering of every recorded frame.
- Default: Watermark will be inserted as the word ‘ VR’.
- User Define Mark: Watermark will be inserted as user defined word
for easy identification or organization.
3 Network
※※
Server Setup
- Enable the Network Server: Setup System to be used as Internet Server.
Server image can be viewed from remote Client Program OR Internet Web
Browser by using private line connected to internet.
- Enable the Modem Server:
Setup System to be used as PSTN Network Server.
Server image can be viewed from remote Client Program by using
modem connected through PSTN Network(Internet Web Browser not
supported.).
※※
Network Information
System IP Address & MAC Address
- Direct connection to Server is possible from remote Client Program OR
Internet Web Browser when use of Fixed IP.
- Direct connection to Server is possible through DHS Server from remote
Client Program by using DHS Service provided by our company when use of
Dynamic IP.
※※
User Limit
- IP Router User: Check [User of Sharing IP] if DVR System is connected to
internet using IP Router.
- Register Dynamic IP User ID: ID must be registered to use DHS Service when
use of Dynamic IP. Contact our company for more detailed information
regarding Dynamic IP.