User's Manual

Ⅱ User Manual - Main Program
32
33
6 Event
※※
Sensor Input
- Check [Enable the Sensor] and configure the channel
of camera and sensor input channel.
※※
Enable Event Recording
- Use Digital Output OR auto-recording when there is
sensor input signal.
e.g.) Configure 1,2,3,4 Sensor Input for CH1 Camera & 5,6,7,8
Digital Output. Enable Event Recording & Warning Sound from
speaker.
※※
Motion Detection
Motion Detection Area Setup, Motion Detection
Sensitivity Setup
Setup MD Area: Setup rectangular area in screen
using the mouse.
Motion Display: Indicate the specific area by
changing color when motion is detected.
Motion Recording: Record when there is movement
in image
7 Receiver
※ Port Setup: Select serial port to use PAN/TILT Camera OR Receiver.
※ Device Type: Select protocol of receiver from Device Type Panel.
8 Video Out
Video Out function can be used by Loop-Through to analog monitor.
※※
Enable the TvOut Rotation :
One channel can be viewed during the directed time gap or
various selected channels can be viewed in timed sequence.
※※
Single Mode : Only the selected one channel is viewed