User's Manual

Ⅰ

Installation manual - Hardware Installation

4. Real Display(RD) Board Installation

4-1.

Insert the Real Display Board into an empty PCI Slot in DVR PC.

4-2. Use Cable to connect Real Display Board with DVR Board.

Real Display Board cannot be used alone, it must be used with S, H, HPLUS

DVR Boards.

3. P/T/Z Installation

3-1. P/T/Z Cable

[A] Cable : Connect to COM port of DVR PC

[B] Cable : Connect to DVR Board

[C] Cable : Connect to Receiver Cable

- HP Board: Connect the 8CH MIC(B) to DVR Board(A) starting

from the top.

- RC Board: Connect the 4CH MIC(B) to DVR Board(A) starting

from the left.

<8CH>

<4CH>