User's Manual

Ⅱ User Manual - NetClient Interface
58
59
3-3 Group Connection
Click [Connect group] to connect.
(It will take about 10~30 sec to connect to all channels.)
4 Modem User Connection Setup
4-1 Modem Setup
Select [Modem] icon from [Network Type Selection Panel]
to connect from remote site using Modem.
Click [Connection] icon from [Control Panel] to run
[Modem Connect] window.
[Modem Connection] window is initialized. Insert Telephone No.(Insert
the number assigned to DVR Server. Insert “
” and Telephone No. to
add the waiting time while the line is being dialed. E.g.:
9w0232851525), ID & Password, (Insert the ID & Password which is
registered in the Server program, [User Management].) Select the
camera channel number and click [Connect]. You can only access one
channel at one time using Modem. In order to change to different
channel, click [Disconnect] from [Modem Connect] window, change
channel and reconnect. Note: If You are not using 56K Internet Access,
you do not need to access Internet Service Provider.
Click [Properties] to view General/Advanced default setup.
Use default when use of modem.
4-2 Configuration Setup
The modem model name will appear when you click
[Configuration]. During intial setup, the Model Name needs to
be confirmed to complete registration, thereafter, this step will
be bypassed.