User's Manual

Ⅱ

User Manual - NetClient Interface

5 Search

5-1 Remote Search

※Broadband: To search recorded images from remote site,

click [LAN] from [Network Type Selection Panel] when using

Broadband Internet connection to connect to Server. Click

[Search] Icon from [Control Panel] to run Search program.

※※

Modem: To search recorded images from remote site, click

[Modem] from [Network Type Selection Panel] when using

Modem to connect to Server. Click [Search] Icon from [Control

Panel] to run Search program.

※※

Remote Search

[Remote Search using Internet]

- Server Connection: Insert Server, Connection Port, ID &

Password, Channel number and click [Connect].

- Data Load: Click the date from calendar and click [Load Data].

- Insert telephone no. of Server, ID & Password, channel number

and click [Connect].

- Image Output Control Panel: Consists of [Play] & [Stop].

- Screen Partition Panel:

Maximum 4CH search & playback is available from remote site

using Broadband.

1CH search & playback is available from remote site using

Modem.

- Search Data Process Bar

※ Hour Bar: If there is recorded data in selected hour, recorded

data is indicated in red from minute bar

※ Minute Bar: Minutes of recorded data is indicated from

0~59min. and recorded data is indicated in red.

- Control Panel: Consists of [Surveillance Mode] icon, [Local

Search] icon, [Remote Search] icon, [Save Still Image] icon

and [Print Still Image] icon.

Surveillance Mode Icon: Converts to Surveillance Mode.

Local Search Icon: Runs [Local Search] window.

Remote Search Icon: Runs [Remote Search] window.