User's Manual

Ⅱ User Manual - NetClient Interface
52
53
4 NetClient Interface
01. Intotech Net-Client Interface
NetClient Program is able to receive images from DVR Server using
the Internet. NetClient functions: Display & recording, camera control
from remote site and other features that we will illustrated in this
document.
1-1 Control Panel
The Control Panel can search program, open connection setup,
save & print still images and record server image from remote PC
where NetClient is installed.
1-2 Screen Partition Panel
Support 7 kinds of various screen partition,
full-screen and sequence rotation display
mode.
Search Icon: Runs search program.
Connection Setup Icon:
Run [Connecting & Configuration Management] used for internet
access. Run [Modem Connection] used for internet access .
1-3 Pan/Tilt Control Panel
Pan / Tilt / Zoom / Focus control is supported from remote site
when DVR Server is using Pan/Tilt camera. Control sensitivity
can be configured in Control Panel.
Only broadband Internet users can use Pan/Tilt control,
Modem users cannot use this feature.
1-4 Network Type Selection Panel
Select [LAN] from Network Type Selection
Panel when using broadband connection
and Select [Modem] when using Modem.
1-5 Camera Selection Panel
Click specific channel from Camera Selection Panel to
enlarge and view image.
→ Search Icon
→ Print IconConnection Setup Icon →
Save Icon
REC Icon
→→All Icon
Save Icon: Save selected channels as JPEG file.
Print Icon: Print the selected channels in various modes.
REC Icon: Record the image of selected channels.
All Icon: Select all channels to record.