50Mbps Wireless mini-USB Adapter 150Mbps Wireless mini-USB Adapter User Manual Version 1.
150Mbps Wireless mini-USB Adapter CONTENTS 1 Product Introduction..............................................................................................................................2 1.1 Product Features ...........................................................................................................................2 1.2 Security Warning............................................................................................................................2 1.3 Package Contents .....
150Mbps Wireless mini-USB Adapter 1 Product Introduction Thank you for choosing the 150Mbps Wireless mini-USB Adapter. The Wireless mini-USB Adapter is a cost-effective, highly integrated Wireless product, fully complies with 802.11b/g/n specifications, adopting 1T1R architecture, up to 150Mbps data rate. You can connect a desktop or notebook computer to a wireless network and access high-speed Internet connection which is beneficial for the such as HD video streaming and online gaming applications.
150Mbps Wireless mini-USB Adapter 2 Installation Guide This section will teach you how to use the CD-ROM software for the installation of your Wireless USB Adapter package, the package has been the driver, configuration software, which installs its configuration software will automatically install the driver. Take Windows XP Operating system as an example, installation steps for other operating systems are similar. 2.1 Installation Steps: 1.
150Mbps Wireless mini-USB Adapter 3. Insert the Resource CD into the CD-ROM driver. (Figure 3) 4. Please double-click the “Setup” file in the CD-ROM. (Figure 4) 5. Click “Next” to continue installation.
150Mbps Wireless mini-USB Adapter 6. Next, the installation process will take about a minute, please wait for a second.
150Mbps Wireless mini-USB Adapter 7. It will appear the interface as below picture after finishing all of the above operations, you can choose “restart my computer now” or “restart my computer later”, Click “Finish” to complete the installation.
150Mbps Wireless mini-USB Adapter 3 Connect to Network This section will teach you how to use Wireless LAN Utility to connect to the wireless network. Please refer to the following steps: 1. When the wireless USB adapter installation successfully, right the table’s bottom will show an icon as follow: (Figure 10) 2. Please click that diagram mark will be appear as follows interface.
150Mbps Wireless mini-USB Adapter 3. Select the “Available Network” options, then click the “Refresh”, the Wireless USB Adapter will search usable network automatically, shows as below diagram: (Figure 12) 4. Then select an “Available Networks”, click the “Add to Profile” to connecting the wireless network.
150Mbps Wireless mini-USB Adapter 5. If the network is unsecured, you will directly connect to it. If it is security-enables, you can input the security key into the field below Network key and then click “OK” to continue. (Figure 14) 6. The wireless network connects a chain success, and will be appear as follows interface. (Figure 15) The whole allocation process has been already complete.
150Mbps Wireless mini-USB Adapter Appendix: Specifications Normal Standards and Protocols IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Interface Type USB 2.0 Standard, USB1.1 Compliant Frequency Band 2.4 ~ 2.4835GHz 11b: 1/2/5.
FCC RF EXPOSURE INFORMATION: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EU regulatory conformance The equipment named above is confirmed to comply with the requirements setout in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC), Low-voltage Directive (2006/95/EC) and R&TTE (1999/5/EC). The equipment passed the test which was performed according to the following European standards: •ETSI EN 301 489-1 V1.9.2 (2011-09) •ETSI EN 301 489-17 V2.2.1 (2012-09) •ETSI EN 300 328 V1.8.