User's Manual

Adding a Wireless computers to the AP/Router with WPS Button

This is the easiest way to establish a connection to the AP. First, check

whether your end device supports WPS. For further details, please read the

operating instructions for your end device.

1. Log on to the computer.

2. Press the WPS button on the AP/Router for

seconds. The WIFI/WPS

LED now flashes for approx. 2 minutes.

3. Within these 2 minutes, please press the connection button (WPS) on

your end device. (For further details, please read the operating

instructions for your end device.)

Your end device then automatically connects to your AP/Router and applies

all of the settings. You should see icons

for the computer you added

and for the other computers and devices that are part of the network.

Adding a wired (Ethernet) computer to the AP/Router

1. Plug the AP/Router to a socket. Connect your computer / laptop with

the AP/Router with enclosed RJ45 Cable.

2. To Confirm that you added the computer, do the following:

Open Network by clicking the

Start

button , and then clicking

Control Panel

. In the search box, type

network

, and then, under

Network and Sharing Center, click

View network computers and

devices

. You should see icons

for the computer you added and

for the other computers and devices that are part of the network.

For more information:

http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network

http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network

http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network