User's Manual

Configure the Wi-Fi Repeater Mode
Configure the Wi-Fi Repeater Mode with WPS Button.
This is the easiest way to configure the AP/Router. First, check whether
your wireless router supports WPS. For further details, please read the
operating instructions for your wireless router.
1. The mode selector must be set to the "AP/Repeater" position for
Repeater Mode.
2. Plug the AP/Router into a wall socket.
3. Press the WPS button on the AP/Router for at least 6 seconds.
The WiFi/WPS LED now flashes for approx. 2 minutes.
4. Within these 2 minutes, please Press the WPS button of your Wireless
AP/Router directly for 2 - 3 seconds. (For further details, please read
the operating instructions for your wireless router.)
The AP/Router then automatically connects to your wireless router and
copies wireless key of the settings.
The AP/Router can be accessed via the SSID and the wireless key of your
wireless router.