User Manual

13
Intracom Asia Co., Ltd.
Figure - 19
CPE Connection Status
When CPE successfully connect with front-end WLAN base station or AP, the status will
be “Connected”, also other options listed on the page .e.g “Peer-end SSID”,MAC address，
RSSI etc
2 PC Configuration:
To set automatic obtain IP address on PC or laptop side, then PC will get a IP address from
CPE or ISP WLAN DHCP Server. As shown in Figure – 20.
Note:
Signal strength should be greater than‐75dBm,if it’s weak than this CPE’s
Bridge/Repeaterjointwillbeworse. Itsperformanceofrepeaterjointwillgetworse
inNLOScondition,butinorderto havethebestsignalstrengthandthroughputyou
canadjustthedirectionofCPE'sdirectionalANT