User Manual

15
Intracom Asia Co., Ltd.
 Factory Defaults: Restore system configuration to factory defaults.
 Reboot: re-power on system by software interface.
 WEB Server: To set web server related option here.
 Firmware Upgrade: To upgrade CPE’s firmware for obtaining a more stable and
functional performance of the CPE.
You could check system logs on “Log Management” page, as shown in Figure -22
Figure - 22 System Logs
Note:
To restore CPE to factory defaults via physical reset button on housing by pressing
resetbuttonin5‐10sorclick“Reset”buttononwebpage.