User Manual

6
Intracom Asia Co., Ltd.
Enter encryption password→Select specified WAN type PPPOE 、 DHCP 、 Static →click
Next Step
Figure – 9 WISP Settings
② LAN Settings:
You could change Gateway IP adress here or keep defaults,then click Next
Figure - 10 LAN Settings
③DHCP Server Settings:
You can enable or disable DHCP server here,then click Next
Not
e
：
 DHCP

:

Ifthedeviceconnectto

DHCPServerofuplinkorWISP,plsselectthismode.The

devicewillobtainIPaddressfromuplinkDHCPserverorWISPautomatically.
 PPPoE:IfWISPofferPPPOEaccesstype,plsselectthismode.Youshouldfillinboththe
UserNameandPasswordthatyourISPsupplies
 Static
： IfWISPofferStaticIPaccess,plsselectthismodeandenterIPaddress/Subnet
Mask/GatewayandDNSserverIPaddress 