User Manual

8
Intracom Asia Co., Ltd.
The Fourth Step： AP Client Settings
AP Client：In this mode，the device associate with nearby AP and checks the network device
combination as a standard mobile unit(MU).The access point then forms a wireless bridge
between the wired LAN and clients through the device. CPE broadcasting its SSID, client devices
obtain IP address from uplink hotspot or WISP.
Application Topology:
Figure - 13 Network Topology under AP Client mode
AP Client setup guide：
Connects to wireless AP or WLAN base station
Check “Operation Mode”→select ”AP Client”→click” Scan”→select specified SSID you
wish to connect with, then fill-in password →Click “Apply” to save settings
Note:
BothEthernetportareLANportonAPClient、AP、WISPmode.(BothLANportsupport
POEforAP110
5
modle
)

APor
WLAN

CPE
LAN