Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
121
WiBAS-Connect and Parabolic 0.3 m with Adaptation Plate /
0.6 m with Clamps, Continued
Procedure
using 0.3 m
antenna and
adaptation
plate, continued
Step
Action
3
Use the respective set of adaptation plate packing materials to
install the elements, as shown below.
Use the adjustable torque wrench with hexagon female bit to
tighten the screws.
Do not over tighten the screws. Adjust the tool for
applying max tightening torque 4.2 Nm.
Continued on next page