Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
161
Grounding Cable, Continued
Procedure for
WiBAS OSDR-
TS
How to install the grounding cable to radio unit (OSDR-OB-U-DSDS-SB),
proceed as follows:
Step
Action
1
Use the tool to remove the M5 nut and one spring washer.
2
Perform the following actions:
 Install the cable, as shown below:
 Use the tool with M5 hexagon female bit to fully tighten the
screw.
Do not over tighten the M5 nut. Adjust the tool for
applying maximum tightening torque 4.2 Nm.
DO NOT forget to install the other end of the grounding
cable to grounding bar.
End of procedure.