Installation Instructions

4. Installation Procedures

114

WiBAS-Connect and Parabolic 0.3 m with Adaptation Plate /

0.6 m with Clamps, Continued

Procedure

using 0.6 m

antenna,

continued

Step

Action

For WiBAS

-Connect (CONN-OB-U-DSDS) to 0.6 m antenna

(ANT-IS-2628-2F-C) with clamps, proceed as follows:

Radio unit and antenna should be adjusted for common

polarization, as shown below. If the LINK polarization is

VERTICAL then the feeders should be remained, as shown

below (radio unit – both sides view):

If the LINK polarization is HORIZONTAL, rotate the radio unit

and antenna feeder

(1)

, as shown below (radio unit – both sides

view):

How to change antenna polarization refer to antenna

installation leaflet.

Continued on next page

(1)

How to rotate antenna feeder for changing polarization refer to antenna installation leaflet.