Installation Instructions

Appendix A - Installing Power Injectors
174
POE-AC75-ID / POE-ID-AC72 / POE-AC56-IDH / POE-ID-AC35
Introduction
Apply this procedure for installing the indoor AC power injectors POE-
AC75-ID / POE-ID-AC72 / POE-AC56-IDH / POE-ID-AC35.
Power
injectors
details
 POE-AC75-ID: AC POE injector, indoor, 75 W, -20 C to +40 C, 90 V AC
to 264 V AC, 47 Hz to 63 Hz.
 POE-ID-AC72: AC POE injector, indoor, 72 W, -5 C to +45 C, 100 V AC
to 240 V AC, 50 Hz to 60 Hz.
 This model offers Network Signal and POE Power Output surge
protection (10 / 700 μs): 6 Kv.
 Grounding cable 6 mm2 is included in the package
 POE-AC56-IDH: AC POE injector, indoor, temperature hardened, 56 W.
 POE-ID-AC35: AC POE injector, indoor, 35 W.
Materials for wall mount installation are not included on the packing list.
Continued on next page