Installation Instructions

Appendix A - Installing Power Injectors
180
POE-AC75-ID / POE-ID-AC72 / POE-AC56-IDH / POE-ID-AC35,
Continued
Procedure
How to install the cables (Ethernet, power and grounding), proceed as
follows:
Step
Action
1
For POE-ID-AC72 install the grounding cable.
2
Connect the Gigabit Ethernet (S-FTP) cable to IN or LAN
receptacle of the power injectors.
Then connect the other end of the cable to customer network
receptacle.
3
Connect the Gigabit Ethernet (S-FTP) cable to OUT or POE
receptacle of the power injectors.
Then connect the other end of the cable to the respective
receptacle of the radio unit.
4
Connect IEC plug to the respective input of the power injector
with the main AC socket.
End of procedure.
Procedure
How to install the devices onto the wall surface, proceed as follows:
Step
Action
1
Position the device on the wall surface and using a pencil mark
the drill points. With the drill machine (fitted with 5 mm bit), drill
four holes on the wall surface, at a depth of 30 mm.
2
Install the wall plugs and using the cross headed screwdriver
tighten the screws.
End pf procedure.