Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
31
Materials, Continued
Antennas
One of the following antennas, depending on site-specific RF planning
requirements:
 Panel antenna for WiBAS
TM
-Connect and WiBAS
TM
OSDR-TS,
10.5 - 10.65 GHz (25 dBi) - rectangular flange (ANT-IS-11-PL-C).
 Parabolic Antenna 0.3 m for WiBAS
TM
-Connect
(1)
and
WiBAS
TM
OSDR-TS, 24.50 - 26.50 GHz (36.8 dBi), - (ANT-IS-26-1F).
 Low profile parabolic antenna 0.3 m for WiBAS
TM
-Connect,
10.15 - 10.65 GHz (29 dBi) - rectangular flange (ANT-IS-10-1F-C).
 Low profile wideband parabolic antenna 0.3 m for WiBAS
TM
-Connect,
24.25 - 26.50 GHz (36.3 dBi) / 26.50 - 27.50 GHz (37.0 dBi) /
27.50 - 29.50 GHz (37.5 dBi) - rectangular flange (ANT-IS-2628-1F-C).
 Low profile wideband parabolic antenna 0.3 m for auto-polarization
WiBAS™G5 Connect+ and WiBAS
TM
-Connect, 24.25 - 26.50 GHz
(36.3 dBi) / 26.50 - 27.50 GHz (37.0 dBi) / 27.50 - 29.50 GHz (37.5 dBi) -
circular flange (ANT-DP-2628-1F-C).
 Low profile wideband parabolic antenna 0.5 m for WiBAS
TM
-Connect,
24.25 - 26.50 GHz (39.5 dBi) / 26.50 - 27.50 GHz (40.0 dBi) /
27.50 - 29.50 GHz (40.5 dBi) - rectangular flange
(ANT-IS-2628-1D6F-C).
 Low profile wideband parabolic antenna 0.5 m for auto-polarization
WiBAS™G5 Connect+ and WiBAS
TM
-Connect, 24.25 - 26.50 GHz
(39.5 dBi) / 26.50 - 27.50 GHz (40.0 dBi) / 27.50 - 29.50 GHz (40.5 dBi) -
circular flange (ANT-DP-2628-1D6F-C).
 Low profile wideband parabolic antenna 0.6 m for WiBAS
TM
-Connect,
24.25 - 26.50 GHz (42.1 dBi) / 26.50 - 27.50 GHz (42.0 dBi) /
27.50 - 29.50 GHz (42.8 dBi) - rectangular flange (ANT-IS-2628-2F-C).
 Low profile wideband parabolic antenna 0.6 m for auto-polarization
WiBAS™G5 Connect+
(2)
and WiBAS
TM
-Connect, 0.6 m,
24.25 - 26.50 GHz (42.1 dBi) / 26.50 - 27.50 GHz (42.0 dBi) /
27.50 - 29.50 GHz (42.8 dBi) - circular flange (ANT-DP-2628-2F-C).
The order codes for antennas are indicatives.
The complete list of order codes is available to the respective product
catalog (see Reference manuals).
Continued on next page
(1)
For WiBAS
TM
-Connect installation the adaptation plate WCONN-PAR-ANT-KIT is required.
(2)
The 0.6 m antenna with WiBAS
TM
G5 Connect+ combination will be available in future product release.