Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
33
Materials, Continued
Power
injectors
One of the following power injectors, depending on site-specific powering
requirements:
 AC POE injector, indoor, 75 watt (POE-AC75-ID).
 AC POE injector, indoor, 72 watt (POE-ID-AC72).
 AC POE injector, indoor, 56 watt (POE-AC56-IDH).
 AC POE injector, indoor, 35 watt (POE-ID-AC35)
 AC PONE injector, outdoor, 67 watt (PONE-OD67-AC).
 DC PONE injector, outdoor, 60 watt (PONE-OD-DC).
 DC PONE injector, outdoor, 114 watt (POE-HP-OD67-DC).
Grounding kit
The following grounding kit, depending on site-specific equipment
requirements:
 Grounding kit (GND-KIT16-OD).
Cables
One of the following cables, depending on site-specific cabling
requirements:
 Ethernet cable, shielded, Cat5E (S-FTP) (ETH-CAB-SFTP).
 AC power supply cable - 3 x 0.75 mm
2
(AC-PWR-CAB).
 DC power supply cable - 2 x 1 mm
2
(DC-PWR-CAB-1).
 DC power supply cable - 2 x 2.5 mm
2
(DC-PWR-CAB-2).
 DC power supply cable - 2 x 2.5 mm
2
(DC-PWR-CAB-3).
 Grounding cable, indoor use - 6 mm
2,
(GND-CAB6-ID).
Cables gland
One of the following cables gland, depending on site-specific cabling
requirements:
 M20 gland for Ethernet cable (M20-GLAND).