Installation Instructions

3. Before Starting the Installation

3.3. Site Prerequisites

Site survey

Site survey should be done before start the installation taking in

consideration the following:

Premises information

 Site details (address, contact persons, GPS and/or map co-ordinates,

etc.).

 Site access and storage information (means of transport, equipment

storage and lifting information, etc.).

 Site location maps.

Network planning

 Site Coordinates.

 LOS verification (between WiBAS

Base stations and WiBAS

Terminal

stations).

 Rooftop information (height, status, access, dimensions, layout, etc.).

 Information about pre-existing indoor/ outdoor equipment.

 Available mounting space (on the buildings’ roofs) to reserve for the

installation of the outdoor equipment.

Site-specific information

 Mechanical specifications of masts/ towers (type, dimensions/ diameter,

material, exterior finishing, etc.).

 Location of appropriate grounding points (bar or terminals).

 Location of appropriate power supply distribution points.

 Location of cable conduits available for routing the cables.

 Location of the network port distributors.

 Total length of the cables required.

Preparation of

the installation

premises

 Access to the installation premises must be facilitated during the

installation period.

 Entrances must be large enough to enable the easy transportation of the

new equipment.

 The floor must be level, smooth and able to bear the load of the

equipment.

 The roof must be engineered to bear the weight of the service personnel

and the outdoor equipment.

Continued on next page