Installation Instructions

3. Before Starting the Installation
60
Site Prerequisites, Continued
Circuit
breakers
The following table provides the circuit breakers characteristics for
powering of power injectors:
Order Code
Required Circuit Breaker
 POE-AC75-ID
 POE-ID-AC72
 POE-AC56-IDH
 PONE-OD67-AC
 POE-ID-AC35
 single-pole MCB 6 A
 230 V AC (voltage rating)
 C-curve (for Industrial Applications)
 PONE-OD-DC
 POE-HP-OD67-DC
 single-pole MCB 6 A
 min 72 V DC (voltage rating)
 C-curve (for Industrial Applications)
Equipment
installation
 The outdoor equipment, inclusive of the radio transceiver(s) and
antenna(s), should be mounted on a mast or on a tower.
 The radio/antenna mounting kit should roughly point to the direction of the
opposite unit (based on the site survey data).
 Each radio and antenna unit must be installed according to the radio
planning data (height, degrees e.t.c).
Tower or
monopole
installation
 The pole construction should be rust free and strong enough to handle
the weight and restrict movement due to air pressure.
 Should be perfectly perpendicular to allow correct alignment of the
antenna.
 The antenna mounting kit should roughly point to the direction of the
opposite unit (based on the site survey data).
 Each radio and antenna unit must be installed according to the radio
planning data for pole installation (height, degrees e.t.c).
 The outdoor equipment, inclusive of the radio transceiver(s) and
antenna(s), should be mounted on a mast or on a tower.