Manualshelf

Installation Instructions

ManualsBrandsINTRACOM ManualsElectronicsPtMP/PtP Gigabit Terminal Radio 27-29 GHz
71727374757677787980
WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
71
WiBAS G5 Connect+ Combo, Continued
Procedure for
WiBAS G5
Connect+
Combo
How to install the WiBAS
TM
G5 Connect+ Combo to pole mounting kit
(WG5-WCONN-PL-MNT), proceed as follows:
Step
Action
1
Mount the azimuth bracket onto the pole bracket and then install the respective set of
mounting kit packing materials, as shown below:
Do not over tighten the screws (Set-A and Set-B). Adjust the tool for applying
max tightening torque 15 Nm.
Do not over tighten the M5 serrated nuts. Overtightening will cause
deformation of the support clamp.
Continued on next page