Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
73
WiBAS G5 Connect+ Combo, Continued
Procedure for WiBAS G5 Connect+ Combo continued
Step
Action
3
Mount the elevation bracket onto the radio unit and then install the respective set of
mounting kit packing materials, as shown below:
Do not over tighten the screws. Adjust the tool for applying max tightening
torque 5.5 Nm for M5 screws.
4
For cables installation refer to Installing Radio Units Cables .
End of procedure.