Installation Instructions

4. Installation Procedures

WiBAS-Connect Combo, Continued

Tools

 Adjustable torque U-wrench.

 Drilling machine (fitted with a 13 mm drill bit) for wall mount installation.

Procedure for

WiBAS-

Connect

Combo

How to install the WiBAS

-Connect Combo to pole mounting kit (WCONN-

PL-MNT), proceed as follows:

Step

Action

Mount the azimuth bracket onto the pole bracket and then

install the respective set of mounting kit packing materials, as

shown below:

Do not over tighten the screws. Adjust the tool for

applying max tightening torque 15 Nm.

Continued on next page