Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
87
WiBAS-Connect Combo, Continued
Procedure for
WiBAS-
Connect
Combo,
continued
Step
Action
5
Mount the elevation bracket onto the azimuth bracket and then
install the respective set of mounting kit packing materials, as
shown below:
Do not over tighten the screws. Adjust the tool for
applying max tightening torque 15 Nm.
6
For cables installation refer to Installing Radio Units Cables .
End of procedure.
Continued on next page