Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
175
WiBAS G5 evo-BS and External GNSS Module, Continued
Procedure,
continued
Step
Action
11
Use the U-wrench tool to fully tighten the screws.
Do not over tighten. Adjust the tool for applying
maximum tightening torque 15 Nm.
12
For cable installation into the radio unit port follow the steps 4,
5, 6 and 7.
For cable removal (if required) follow the step 8.
End of procedure