Installation Instructions

4. Installation Procedures
166
WiBAS G5 evo-BS and External GNSS Module
Procedure
How to install external GPS module (WG5-GPS-MOD-KIT) to
WiBAS
TM
G5 evo-BS, proceed as follows:
Step
Action
1
Using hose clamps follow this step.
Using U-bolt follow the step 9.
Use the U-wrench tool to fully tighten the screws.
Do not over tighten. Adjust the tool for applying
maximum tightening torque 7.4 Nm.
Continued on next page