Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
245
POE-HP-OD-AC
Introduction
Apply this procedure for installing the outdoor AC power injector
POE-HP-OD-AC.
Power injector
details
Characteristics:
 AC POE injector
 outdoor
 120 watt
 Pole / wall mount
 100-240 V AC, 2.0 A, 50 / 60 Hz.
 temperature hardened
 operating temperatures -40° C to +60° C
Packing List:
 Ethernet cable glands are pre-installed on the unit (current sharing on all
four pairs of Ethernet cable).
 Grounding screw is pre-installed on the unit.
 AC Power connector is included in the package.
 Pole mounting kit included in the package (for wall installation).
 For pole installation, a mounting bracket (INSTPONE-PL3) should be
ordered.
 For grounding, a grounding kit (GND-KIT16-OD) should be ordered.
 For powering, a DC power cable (AC-PWR-CAB-1) should be
ordered.
 Applicable Ethernet cable: SF/UTP (Cat5E or Cat6) with shielded RJ-
45 plugs.
 Lightning surge protection is embedded in the unit.
Continued on next page